Speedify Provides Starlink WAN Aggregation for Business Networks

What Starlink WAN Aggregation Means for Business Networks

WAN aggregation combines multiple wide-area network connections into a single higher-capacity, more resilient internet path. For businesses deploying Starlink alongside other internet connections, WAN aggregation means Starlink’s satellite bandwidth is added to your total available throughput rather than operating as a separate connection that devices either use or don’t.

Traditional hardware WAN aggregators on dedicated appliances from vendors like Peplink, Cradlepoint, and Mushroom Networks aggregate WAN connections at the session or flow level. Each session is assigned to one WAN interface. Aggregate download and upload speeds are improved because different sessions use different connections, but no single session benefits from multiple WAN connections simultaneously.

Speedify takes a different approach. Speedify’s channel bonding technology aggregates WAN connections at the packet level, not the session level. A single active session, like a video upload, a VPN tunnel, a live stream, draws bandwidth from all aggregated WAN connections at the same time. Your team gets closer to the combined upload and download capacity of all internet connections, not just the capacity of one.

For a business running Starlink delivering 150 Mbps alongside a wired Ethernet broadband connection delivering 100 Mbps and a 4G/5G cellular connection delivering 80 Mbps, Speedify’s WAN aggregation can provide up to 95% of the combined 330 Mbps capacity in optimal conditions. This is available to individual sessions, not just spread across sessions.

How Speedify Combines Starlink Internet and Other WAN Connections

Speedify’s channel bonding technology routes all internet traffic through a single encrypted Speedify tunnel. Inside that tunnel, Speedify monitors latency, packet loss, and jitter on each WAN connection every few milliseconds and distributes packets across all active connections based on real-time performance.

Key behaviors of Speedify’s WAN aggregation:

• Packet-level distribution. Individual packets from a single session are sent across multiple WAN connections simultaneously. The receiving Speedify server reassembles them in order. The application sees a single high-throughput internet connection.
• Dynamic rebalancing. If Starlink satellite congestion causes latency to spike, Speedify reduces the share of traffic going through Starlink and increases the share going through wired Ethernet or 4G/5G cellular automatically. When Starlink recovers, Speedify rebalances again.
• Seamless failover. When a WAN connection fails entirely, packets that were on that connection are immediately rerouted through the remaining aggregated connections. Active sessions don’t reset. VoIP calls don’t drop. VPN tunnels stay established.
• Internet connection prioritization and data limits. Network admins on Speedify Teams plans can configure which WAN connections carry the most traffic, set data limits on metered connections like 4G/5G cellular, and apply rate limits per connection.

Starlink WAN Aggregation Configurations with Speedify

• Starlink internet plus wired Ethernet broadband. For businesses with both Starlink and a ground-based ISP connection, Speedify aggregates both into a single higher-capacity path. Either connection serves as automatic failover for the other. Combined upload and download speeds exceed either connection individually.
• Starlink internet plus 4G/5G cellular plus wired Ethernet. Three-WAN aggregation. The highest throughput and most resilient configuration available without dedicated fiber infrastructure. Any single WAN connection can fail without affecting internet availability. All three contribute to combined upload and download bandwidth when healthy.
• Dual Starlink dishes plus 4G/5G cellular. For remote operations without access to wired broadband, two Starlink dishes aggregated with 4G/5G cellular gives maximum satellite throughput plus cellular redundancy. Speedify distributes traffic across all three simultaneously.
• Starlink with metered 4G/5G cellular backup. For businesses managing cellular data costs, Speedify can aggregate Starlink as the primary WAN and keep 4G/5G cellular active with a configured data limit. Cellular bandwidth contributes to the aggregate until the data limit is reached, then operates in standby mode only.

How to Deploy Speedify for Starlink WAN Aggregation

Option 1: Speedify App on Each Device

• Connect the device to each WAN connection: Starlink via Wi-Fi or Ethernet, additional connections via secondary Wi-Fi networks, additional Ethernet ports, or USB modems.
• Install the Speedify app. Speedify runs on Windows, macOS, Linux, iOS, and Android.
• Speedify detects all available WAN connections and begins aggregating them automatically. No manual WAN interface configuration is required.
• Use Speedify Teams to set connection priorities, apply data limits to metered connections, and manage the aggregation configuration centrally across all team devices.

Option 2: Speedify on a Router for Network-Level WAN Aggregation

• Connect all WAN connections: Starlink, wired Ethernet, 4G/5G cellular modems to a Speedify-compatible router running OpenWrt firmware. The Miri X510 bonding router powered by Speedify supports multiple WAN inputs and is designed for network-level aggregation deployments.
• Speedify aggregates all connected WAN connections at the router level. Every device on the network benefits from the aggregated throughput and automatic failover without per-device software installation.
• Manage WAN priorities, data limits, and connection monitoring from the Speedify for Routers dashboard.

The router-level deployment is the right choice for businesses where WAN aggregation needs to cover the entire site, including IoT devices, networked equipment, and hardware that cannot run the Speedify app directly.

Which Businesses Need Starlink WAN Aggregation with Speedify

• Businesses with multiple available WAN connections but no aggregation layer. Organizations that have Starlink plus an existing ISP connection, but devices can only use one at a time, benefit immediately from Speedify’s WAN aggregation. Both connections contribute to throughput and provide failover for each other.
• Remote sites with high concurrent user counts. A remote office or field site where many team members are simultaneously on video calls, uploading files, and using cloud applications needs more aggregate bandwidth than a single Starlink dish provides. WAN aggregation with Speedify combines available connections to meet that demand.
• Operations requiring both throughput and uptime SLAs. Businesses that carry their own connectivity SLAs to clients or internal stakeholders need a WAN architecture that doesn’t have a single point of failure. Speedify’s multi-WAN aggregation provides both the throughput and the redundancy those SLAs require.
• IT teams replacing or supplementing hardware WAN aggregators. Network engineers who have evaluated or deployed hardware-based WAN aggregation appliances can use Speedify as a software-defined alternative that runs on existing router hardware or purpose-built devices, without proprietary appliance costs.
• MSPs standardizing multi-WAN deployments across client sites. Managed service providers can use Speedify as a consistent WAN aggregation layer across all client sites, managed from the Speedify Teams dashboard, regardless of what combination of WAN connections each site has available.

Speedify Is Used on Millions of Devices Worldwide

Speedify has powered stronger Internet for millions of consumers since 2014

15M

Millions of Speedify downloads worldwide, and growing every day

5⭐️

More than 75,000 5-star reviews for Speedify in the iOS and Android app stores

82

Points of Speedify presence in datacenters around the globe

500TB

Hundreds of terabytes of fast, secure data streamed every week via Speedify

Speedify Partners

Speedify partners with these amazing organizations to deliver better internet and next-generation networking technology to their customers and employees.

Speedify Plans for Starlink WAN Aggregation

Speedify Teams gives network admins centralized management of Starlink WAN aggregation across an entire organization: WAN priorities, data limits, usage monitoring, and team device management from a single dashboard.

For businesses requiring dedicated bandwidth, static IP addresses, and port forwarding on their aggregated WAN, Speedify Dedicated Servers are available as a managed option. For businesses with data residency requirements or specific network architecture constraints, Speedify Self-Hosted Servers let your team run Speedify traffic through your own private server infrastructure.

The Speedify app runs on Windows, macOS, Linux, iOS, Android, and supported OpenWrt routers. For network-level Starlink WAN aggregation, the Miri X510 bonding router powered by Speedify is the purpose-built hardware option.

Speedify Business Solutions

Speedify Teams

Get faster uploads and downloads and a more reliable internet connection for all the people and devices in your business.

View Plans & Pricing

Learn More

Speedify for Routers

Power your OpenWRT, GL.iNET, or Miri router with Speedify and combine Wi-Fi, Ethernet, 4G, 5G, Starlink and other satellite internet connections together.

View Plans & Pricing

Learn More

Speedify Embedded Solutions and Integrations

Embed Speedify software into your app or hardware products and leverage the core channel bonding technology of Speedify in new and interesting ways.

Book a Demo

Learn More