Speedify Connects 3 Starlink Dishes for Faster, More Reliable and Secure Internet
The best way to connect 3 Starlink dishes together is to plug all three into one computer, or into one router that runs Speedify. Speedify uses all three Starlink internet connections at the same time, so you get nearly the full speed of the three combined, and you stay online when one Starlink dish drops.
Starlink doesn’t combine dishes on its own. Each Starlink dish is a separate internet connection, and a computer or a normal router uses only one of them at a time. You don’t need a special Starlink router either: Speedify runs as an app on Windows, macOS and Linux computers, and on routers that work with Speedify.
Starlink Internet Connection Dropouts Happen to Everyone
Speedify measures thousands of Starlink users in more than 150 countries. From 29 September to 12 October 2026, fixed Starlink dishes went offline for about 37 minutes a day on average, and Starlink dishes on RVs and boats for about 61 minutes a day.
Starlink also switches each dish to a new satellite every 15 seconds, and a switch can cause a short dropout. Even a perfectly installed Starlink dish goes offline, and about 7 in 10 Starlink users on Speedify use Starlink together with a second internet connection, like 4G/5G cellular.
Three Starlink Dishes Give Faster Uploads and Downloads and Fewer Dropouts
Starlink says one Starlink dish gets downloads of 45 to 280 Mbps and uploads of 10 to 30 Mbps. The speed you actually get moves around inside that range. It drops in the evening when the Starlink network is busy, rain and snow weaken the signal, and every Starlink dish switches satellites about every 15 seconds, on the same schedule, so the short dropout at each switch hits all three dishes at once. A 4G/5G cellular connection added to Speedify covers those dropouts. With only one Starlink dish and no other internet connection, Speedify works as an encrypted VPN and cannot stop that dish from dropping.
Using three Starlink dishes together with Speedify helps you:
- Get more download and upload speed than one Starlink dish can give you
- Stay online when one Starlink dish is blocked, loses power or has a problem
You don’t have to buy an expensive business router that takes several internet connections. Speedify does the same job as an app on your computer, or on a router that works with Speedify.
What You Need to Connect 3 Starlink Dishes Together
Speedify is an app that combines Wi-Fi, 4G/5G cellular, Starlink, wired internet and other internet connections into one internet connection, and encrypts everything you send over it. It works with several Starlink dishes at once, on any device you connect. Adding a fourth? Here is how to run four Starlink dishes at once.
For three Starlink dishes, you need:
- Three active Starlink dishes. Each Starlink dish needs its own Starlink subscription.
- A way to connect each Starlink router: an Ethernet cable, or its Wi-Fi network. The Starlink Gen 3 router has Ethernet ports built in. Older Starlink routers need the Starlink Ethernet Adapter for a cable.
- Optional: a router that works with Speedify, if you want every device in the house to use all three Starlink dishes
- A Speedify subscription
How to Connect 3 Starlink Dishes to One Router That Runs Speedify
- Install your three Starlink dishes following Starlink’s instructions for using several Starlink dishes at one site, at least 0.9 meters (about 3 feet) apart.
- Put Speedify on your router. On a router that runs OpenWrt (free router software that many routers can run), get a Speedify Routers plan and install Speedify on the router. Or use a router that comes with Speedify already on it, like the Miri X510.
- Connect the three Starlink routers to your router. Usually that’s two Ethernet cables plus the Wi-Fi of the third Starlink router, if your router can use a Wi-Fi network as an internet connection.
- Open Speedify on the router and set all three Starlink internet connections to Primary, so Speedify uses them at the same time.
- Test your speed with the speed test built into Speedify, or with a speed test site like speedtest.net or fast.com.
- Connect your phones, laptops and TVs to your router. Every device on it now uses all three Starlink dishes.
Not sure whether your router works with Speedify? Check the list of routers that work with Speedify linked above.
How to Connect 3 Starlink Dishes to One Computer and Share the Internet over Wi-Fi
- Install your three Starlink dishes following Starlink’s instructions for using several Starlink dishes at one site, at least 0.9 meters (about 3 feet) apart.
- Connect all three Starlink routers to a Windows, macOS or Linux computer. Use any mix of Ethernet ports, USB to Ethernet adapters, the computer’s own Wi-Fi and USB Wi-Fi adapters: for example, 2 Ethernet cables and 1 Wi-Fi network, or 1 Ethernet cable and 2 Wi-Fi networks. On a Mac, USB Wi-Fi adapters only work with an Intel processor and macOS 11 Big Sur or older, so connect the extra Starlink routers with Ethernet cables.
- For even fewer dropouts, add 4G/5G cellular too: connect an iPhone or Android phone with a USB cable and turn on its hotspot, or plug in a USB cellular modem.
- Open Speedify on the computer and set all three Starlink internet connections to Primary.
- Test your speed with the speed test built into Speedify, or with speedtest.net or fast.com. A good result for one Starlink dish is anywhere in Starlink’s published range of 45 to 280 Mbps down and 10 to 30 Mbps up. Speedify also shows the live speed of each Starlink dish, so you can spot one that’s falling behind.
- Share the combined internet connection with your phones, tablets and other devices over Wi-Fi, from a computer running Windows, macOS or Linux.
What You Get from 3 Combined Starlink Dishes
Speedify gives you nearly the full download and upload speed of all three Starlink dishes for streaming, video calls, online games and large downloads and uploads. How much of that reaches your devices also depends on how fast your router or computer is. When one Starlink dish goes down, Speedify moves your traffic to the other two, and you stay online.
All three Starlink dishes still use the same Starlink network, and every Starlink dish switches satellites on the same 15-second schedule. A Starlink network outage takes all three down together, and the short dropout at each satellite switch hits all three at the same moment. A 4G/5G cellular connection or a cable or DSL line added to Speedify covers you in both cases.
If you live in a remote area and depend on Starlink, three Starlink dishes combined with Speedify are a simple way to get faster, steadier internet without complicated networking equipment. Speedify makes your Starlink faster, more reliable, and more secure.
Speedify
Get started with Speedify today.
Speedify combines Wi-Fi, 4G/5G cellular, Ethernet, Starlink and satellite into one faster, more reliable internet connection. Free to try: 5 GB a month with a free account. No credit card required.
🚀 Speed
Faster uploads and downloads, because Speedify uses all your internet connections at once.
📶 Stability
If one internet connection drops, Speedify moves your traffic to the others in milliseconds.
🔒 Security
AES-256 encryption on every internet connection, on any network you join.
15M+ downloads worldwide. 75K+ five-star reviews on iOS and Android.



