Unbreakable VPN Connection to Fix Hotspot Shield Disconnects by Combining Starlink, Wi-Fi, 4G, 5G, and DSL with Speedify
A different VPN is worth installing only if it survives the moment Hotspot Shield VPN gives up – the reconnect loop, the screen stuck on connecting over weak Wi-Fi.
Speedify handles that moment by never leaning on one internet connection: it encrypts your traffic and carries it over Wi-Fi, wired Ethernet, Starlink and a phone’s 4G or 5G cellular data at the same time, so a failing internet connection is covered by the others.
The guide below covers why Hotspot Shield VPN gets stuck connecting, five fixes worth trying, and what running Speedify gets you: privacy that holds as you walk from Wi-Fi to cellular data.
Should you have a backup 4G, 5G, Starlink, or cable internet connection?
Yes — every internet connection goes down, including Starlink, which drops for ~34 minutes a day on average. A backup connection from a different provider means one outage never takes you fully offline. The most common options are a 4G/5G cellular hotspot, a cable or DSL line, or a second satellite dish.
4G/5G cellular
Works anywhere. Just a SIM or hotspot — no installation needed.
Learn more →Cable / DSL
Best for fixed locations. Different network, so outages rarely overlap.
Learn more →Second Starlink
Adds redundancy and throughput for remote sites or heavy usage.
Learn more →Speedify bonds any two connections into one — automatic failover, more speed, no dropped calls.
Try Speedify free →Hotspot Shield keeps Disconnecting? Learn why
Hotspot Shield VPN only uses one Internet connection to route all the data to the VPN server. Even if your laptop, iPhone or Android device has multiple Internet connections, Hotspot Shield will only use one of them. When connecting to the VPN server it uses a single socket. This means that your Internet connection will run slower because all the data being sent to and from your device must first be sent to the VPN server for encryption through one channel.
This uses up a lot of your bandwidth. But, not only does it slow down your Internet experience, it also makes the VPN connection vulnerable. One change to your Wi-Fi signal or a fluctuation in your cell signal and you are disconnected from the Hotspot Shield VPN server. If you are traveling (by train, bus or car) or on the move, your connection is even more prone to frequent disconnects, as you get passed between multiple Wi-Fi networks and/or cell towers.
5 Steps to Fix Hotspot Shield Connection Drops
So, what can you do to stay connected to the Hotspot Shield VPN? There are a few steps you can take to minimize your chances of getting disconnected. But, because the problem is a design issue in the way Hotspot Shield and other legacy VPN services are designed, you will always be vulnerable to getting disconnected while using these other services.
To minimize Hotspot Shield connection drops you can:
- Only connect through Wi-Fi where you have a strong, stable signal and where no one else is sharing the connection.
- Remain stationary while connected to Hotspot Shield VPN.
- Plan on using Hotspot Shield VPN for only short amounts of time.
- If you have to connect to Hotspot Shield VPN using your mobile data connection, make sure you do so from a location where you have the strongest signal possible.
- Limit your data use while connected to Hotspot Shield VPN. Videos and images use a lot more data to transmit than text.
Speedify Fixes Hotspot Shield Connection Drops and Slow VPN Speeds
If these steps are not practical for you there is an alternative. The developers at Speedify have created a new VPN for mobility platform. The Speedify protocol was designed from the ground up to be three things:
- Fast
- Secure
- Reliable
Speedify uses a completely different design from the traditional VPNs. It uses multiple Internet connections and multiple parallel sockets. Your data travels to and from the VPN server faster and it is encrypted faster.
Speedify also uses cutting-edge channel bonding technology to allow your iPhone or laptop to connect to the Internet using multiple Internet connections at the same time – e.g. via Wi-Fi and mobile data simultaneously.
Speedify has auto failover so that should one of your Internet connections fail, you stay connected to the VPN through the other connection.
Speedify takes care of monitoring the quality of your connections, rerouting traffic, and keeping you online. You don’t have to worry anything except using the Internet your way.
Tired of Hotspot Shield connected but not working? Try Speedify, the VPN built for privacy, security, and mobility!
Getting tired of when Hotspot Shield disconnects and keeps dropping your connection? Why not try a different kind of VPN? Get started with Speeedify now for FREE – available in the AppStore, Google Play and on our website to download and install! No annoying ads, no strings attached and absolutely no logging of any data.
Alex and the Speedify team are always exploring the latest in networking and security technology—like 5G, 6G, WiFi 7, laser and satellite internet—and sharing it in new discussion content across YouTube, TikTok, Instagram, and LinkedIn every week.
Got a tech question? Let's go deeper! Pop into Speedify Office Hours live every Wednesday at 10 AM Eastern. Speedify CEO Alex Gizis and our network engineers are standing by to break down your questions about networks, tech updates, and Speedify features.
Speedify
Get started with Speedify today.
Combine Wi-Fi, 4G/5G cellular, Ethernet, Starlink, and more into one faster, steadier connection. Free to try — no credit card required.
🚀 Speed
Faster uploads and downloads by bonding all your connections at once.
📶 Stability
Automatic failover in under a second when any connection drops.
🔒 Security
AES-256 encryption on every connection, on every network you join.
15M+ downloads worldwide. 75K+ five-star reviews on iOS and Android.