Speedify Connects Six Starlink Dishes for Faster, More Reliable and Secure Internet
Yes, you can use 6 Starlink dishes at once. Plug all six into one router that runs Speedify, or into one computer running the Speedify app, and Speedify uses all six Starlink internet connections at the same time. You get faster downloads and uploads than one Starlink dish gives you, and you stay online when one Starlink dish drops.
Starlink doesn’t combine dishes on its own. Each Starlink dish is a separate internet connection, and a computer or a normal router uses only one of them at a time. For six Starlink dishes, a router that runs Speedify is usually the easier setup, because few computers have six network ports.
Speedify combines multiple Starlink dishes for failover and faster uploads and downloads
Starlink Internet Connection Dropouts Happen to Everyone
Speedify measures thousands of Starlink users in more than 150 countries. From 29 September to 12 October 2026, fixed Starlink dishes went offline for about 37 minutes a day on average, and Starlink dishes on RVs and boats for about 61 minutes a day.
Starlink also switches each dish to a new satellite every 15 seconds, and a switch can cause a short dropout. Even a perfectly installed Starlink dish goes offline, and about 7 in 10 Starlink users on Speedify use Starlink together with a second internet connection, like 4G/5G cellular.
6 Starlink Dishes Give Faster Uploads and Downloads and Fewer Dropouts
Starlink says one Starlink dish gets downloads of 45 to 280 Mbps and uploads of 10 to 30 Mbps. The speed you actually get moves around inside that range. It drops in the evening when the Starlink network is busy, rain and snow weaken the signal, and each Starlink dish switches satellites about every 15 seconds, which causes short dropouts.
Using six Starlink dishes together with Speedify helps you:
- Get far more download and upload speed than one Starlink dish can give you
- Stay online when one Starlink dish is blocked, loses power or has a problem
You don’t have to buy an expensive business router that takes several internet connections. Speedify does the same job as an app on your computer, or on a router that works with Speedify.
What You Need to Connect 6 Starlink Dishes Together
Speedify is an app that combines Wi-Fi, 4G/5G cellular, Starlink, wired internet and other internet connections into one internet connection, and encrypts everything you send over it. It works with several Starlink dishes at once, on any device you connect. For a bigger site, see how to combine 9 Starlink dishes.
For six Starlink dishes, you need:
- Six active Starlink dishes. Each Starlink dish needs its own Starlink subscription, so you pay for six subscriptions.
- A way to connect each Starlink router: an Ethernet cable, or its Wi-Fi network. The Starlink Gen 3 router has Ethernet ports built in. Older Starlink routers need the Starlink Ethernet Adapter for a cable.
- Room and power for six Starlink dishes: six mounting spots, each with a clear view of the sky, and a power outlet for each Starlink dish.
- A router that works with Speedify that can take six internet connections at once, or a computer that can connect to all six Starlink routers at once
- A Speedify subscription
How to Connect 6 Starlink Dishes to One Router That Runs Speedify
- Install your six Starlink dishes following Starlink’s instructions for using several Starlink dishes at one site, at least 0.9 meters (about 3 feet) apart.
- Put Speedify on your router. On a router that runs OpenWrt (free router software that many routers can run), get a Speedify Routers plan and install Speedify on the router. Or use a router that comes with Speedify already on it, like the Miri X510.
- Connect all six Starlink routers to your router, with an Ethernet cable for each one, or over Wi-Fi if your router can use a Wi-Fi network as an internet connection.
- Open Speedify on the router and set all six Starlink internet connections to Primary, so Speedify uses them at the same time.
- Connect your phones, laptops and TVs to your router. Every device on it now uses all six Starlink dishes. Adding a seventh Starlink dish? See how to connect 7 Starlink dishes together.
How to Connect 6 Starlink Dishes to One Computer and Share the Internet over Wi-Fi
- Install your six Starlink dishes following Starlink’s instructions for using several Starlink dishes at one site, at least 0.9 meters (about 3 feet) apart.
- Connect all six Starlink routers to a Windows, macOS or Linux computer. Use any mix of Ethernet ports, USB to Ethernet adapters, the computer’s own Wi-Fi and USB Wi-Fi adapters: for example, 4 Ethernet cables and 2 Wi-Fi networks, or 1 Wi-Fi network and 5 Ethernet cables. On a Mac, USB Wi-Fi adapters only work with an Intel processor and macOS 11 Big Sur or older, so connect the extra Starlink routers with Ethernet cables.
- For even fewer dropouts, add 4G/5G cellular too: connect an iPhone or Android phone with a USB cable and turn on its hotspot, or plug in a USB cellular modem.
- Open Speedify on the computer and set all six Starlink internet connections to Primary.
- Test your speed with the speed test built into Speedify, or with a speed test site like speedtest.net or fast.com.
- Share the combined internet connection with your phones, tablets and other devices over Wi-Fi, from a computer running Windows, macOS or Linux.
What You Get from 6 Starlink Dishes Combined with Speedify
Speedify adds up the download and upload speed of all six Starlink dishes for streaming, video calls, online games and large downloads and uploads. How much of that total reaches your devices also depends on how fast your router or computer is, because it has to process the traffic of all six Starlink internet connections. When one Starlink dish goes down, Speedify moves your traffic to the others, and you stay online.
All six Starlink dishes still use the same Starlink network, and every Starlink dish switches satellites on the same 15-second schedule. A Starlink network outage takes all six down together, and the short dropout at each satellite switch hits all six at the same moment. A 4G/5G cellular connection or a cable or DSL line added to Speedify covers you in both cases.
If you live or work in a remote area and depend on Starlink, six Starlink dishes used together with Speedify give you faster downloads and uploads than one Starlink dish, from one app on your router or computer. Speedify makes your Starlink faster, more reliable, and more secure. Starting with five? Here is how to connect 5 Starlink dishes.
Speedify
Get started with Speedify today.
Speedify combines Wi-Fi, 4G/5G cellular, Ethernet, Starlink and satellite into one faster, more reliable internet connection. Free to try: 5 GB a month with a free account. No credit card required.
🚀 Speed
Faster uploads and downloads, because Speedify uses all your internet connections at once.
📶 Stability
If one internet connection drops, Speedify moves your traffic to the others in milliseconds.
🔒 Security
AES-256 encryption on every internet connection, on any network you join.
15M+ downloads worldwide. 75K+ five-star reviews on iOS and Android.