10 Starlink Dishes at Once for a Business Site: Combine All Ten Starlinks

Speedify Combines Up to 10 Starlink Dishes at Once for Maximum Internet Upload and Download Speeds

You can use 10 Starlink dishes at once and combine all of them with Speedify. Each Starlink dish is a separate internet connection. Speedify, an app that uses all your internet connections at the same time, sends your internet traffic over all 10, and if one drops, the other 9 keep you online.

Ten Starlink dishes is a setup for large sites, not homes. With a single Starlink dish and no other internet connection, Speedify works as an encrypted VPN and cannot stop it from dropping. Below: when a business needs that many, how Speedify handles them, and what the setup looks like.

Speedify combines multiple Starlink dishesfor faster uploads and downloads DISH 1 DISH 2 DISH 3 WEBSITES APPS VIDEO CALLS STREAMING ONE STARLINK DISH TWO STARLINK DISHES THREE AND MORE STARLINK DISHES SLOWER UPLOADS AND DOWNLOADSFASTER UPLOADS AND DOWNLOADS ONE DISH Limited upload anddownload speeds MULTIPLE DISHES Faster uploads anddownloads DISHES Up to ten HARDWARE None

When a Business Needs 10 Starlink Dishes

Most people never need more than two or three internet connections. But some sites need far more upload and download speed than one Starlink dish, or even three, can give them, and have no cable or fiber to fall back on.

Offshore platforms, remote mines and drilling sites, ships, emergency response staging areas and large live event productions are typical examples.

The practical limit is the device running Speedify: it needs a separate network connection for every Starlink dish you connect to it.

All 10 Starlink dishes use the same Starlink network, so a Starlink outage in the area affects all of them. Every Starlink dish also switches satellites on the same 15-second schedule, so the short drop at each switch hits all 10 at the same moment. For a second internet connection that doesn’t depend on Starlink, add 4G/5G cellular or another type of internet.

Use All 10 Starlink Internet Connections at Once with Speedify

Speedify keeps checking every internet connection: its speed, its delay and how much data it loses. It spreads your internet traffic across every Starlink dish that works well. When one weakens or drops, Speedify moves its traffic to the others. Video calls and uploads don’t drop, and nobody has to change any settings.

Speedify also encrypts all your internet traffic across every Starlink dish.

How to Set Up 10 Starlink Dishes at Once with Speedify

Step 1: Install and Activate All 10 Starlink Dishes

Install every Starlink dish where it has a clear view of the sky, and activate it. Each Starlink dish has its own Starlink router and its own subscription. Plan for the power and the mounting spots all 10 need. Starlink Residential accounts are limited to 8 Starlink kits, so a 10-dish site needs a Starlink Business account, which has no set limit on service locations.

Step 2: Connect Every Starlink Router to the Device Running Speedify

Each Starlink router needs its own separate network connection to that device: several Ethernet ports, a network card with several ports, or a mix of Ethernet and USB network adapters. Each one must show up as a separate, active internet connection. At this size, a server or a router that runs Speedify usually does the job, rather than a laptop, and it covers every device on the site’s network.

Step 3: Download and Run Speedify

Download Speedify and install it on your server or router. Speedify finds every active internet connection and starts using them together right away, with no settings to change.

From then on, Speedify handles all 10 Starlink dishes: it combines them for the most upload and download speed, watches each one, moves traffic to the rest when one drops, and encrypts everything.

Who Uses 10 Starlink Dishes at Once

  • Offshore oil and gas platforms that need more satellite internet speed than one or two Starlink dishes give, for operations, communications and the crew
  • Large ships where many people are online at once and there’s no land-based internet
  • Broadcast and live event teams uploading several high-quality video streams at the same time from a remote place
  • Emergency response command centers that need as much internet as possible when local networks are down
  • Network engineers designing satellite internet for large remote sites

Speedify Is Used on Millions of Devices Worldwide

Speedify has made internet connections faster and more reliable for businesses and individuals since 2014.

15M+

Speedify downloads worldwide

75K+

5-star reviews for Speedify on iOS and Android

82

Speedify server points of presence in 50+ cities on 6 continents

500TB+

Of internet traffic carried by Speedify every week

Speedify Partners

Speedify works with these companies to bring faster, more reliable internet and networking technology to their customers and employees.

Xfinity
Cox
CujoAI
Comcast
OmniAccess
MVD
Magewell
Miri

See the Status of All 10 Starlink Dishes at Once

The Starlink app shows one Starlink dish at a time, because every Starlink dish uses the same 192.168.100.1 address. Speedify shows the live status of all your Starlink dishes side by side, with real-time Starlink dish alerts for each one. If any Starlink dish’s motor is stuck, its pole isn’t straight or it is overheating, Speedify shows the alert once the problem has lasted 15 seconds, and clears it when it’s fixed.

Planning 10 Starlink dishes for a platform, a ship, a mine or a live event? Contact Us to plan the setup, including the router or server that runs Speedify.

Speedify Business Solutions

Speedify Teams

Get faster uploads and downloads and a more reliable internet connection for all the people and devices in your business.

Speedify for Routers

Run Speedify on your OpenWrt, GL.iNet or Miri router to combine Wi-Fi, 4G/5G cellular, Ethernet, Starlink and satellite internet connections for every device on your network.

Speedify Embedded Solutions and Integrations

Add Speedify to your own app or hardware with the Speedify SDK. Your product then combines internet connections, fails over automatically when one drops, and encrypts the traffic, using the same technology as the Speedify app.