Speedify Increases Upload and Download Speed for Any Starlink Antenna by Using It Together with Another Internet Connection
Starlink sells three main antenna types, also called Starlink dishes: the Starlink Mini for travel, the Starlink Standard for homes, and the Starlink Performance for businesses, boats and places where trees or buildings block part of the sky. The best Starlink antenna is the one that fits where you use it, because your Starlink plan and how busy the network is near you set your speed more than the dish does. If you own both a Standard and a Mini, Speedify can run Starlink and Starlink Mini together.
Below: the Starlink antenna types side by side, why a bigger, pricier dish isn’t always faster, and how Speedify gets you faster downloads and uploads from any of them by using it together with a second internet connection, like 4G/5G cellular or another Starlink dish. With one Starlink dish and no second internet connection, Speedify works as an encrypted VPN and cannot make that dish faster or stop it from dropping.
Starlink Internet Connection Dropouts Happen to Everyone
Speedify measures thousands of Starlink users in more than 150 countries. From 29 September to 12 October 2026, fixed Starlink dishes went offline for about 37 minutes a day on average, and Starlink dishes on RVs and boats for about 61 minutes a day.
Starlink also switches each dish to a new satellite every 15 seconds, and a switch can cause a short dropout. Even a perfectly installed Starlink dish goes offline, and about 7 in 10 Starlink users on Speedify use Starlink together with a second internet connection, like 4G/5G cellular.
Starlink Antenna Types Compared: Mini, Standard and Performance
| Starlink Mini | Starlink Standard (Gen 3) | Starlink Performance (Gen 3) | |
|---|---|---|---|
| Best for | Travel and portable use | Home and full-time use | Business, boats and vehicles |
| Router | Built-in Wi-Fi 5 | Separate Wi-Fi 6 router | No router included |
| View of the sky | Smallest dish, narrowest view | Wide view | Widest view, best where part of the sky is blocked |
| Build | Backpack-sized, low power | Fixed install, manual aiming | Rugged, weather-resistant |
Starlink gives speeds per plan, not per dish. Starlink lists downloads of 80 to 200 Mbps on Residential Lite, 65 to 260 Mbps on Roam and 135 to 310 Mbps on Priority, with uploads between 15 and 44 Mbps. Your real speed depends on your plan, your location and how many people near you are online.
Why a Bigger Starlink Antenna Doesn’t Always Mean Faster Internet
The Starlink Performance dish is bigger than the Starlink Standard or the Starlink Mini, and it copes better when trees or buildings block part of its view. But it may give you little extra speed, because Starlink sets speeds per plan, and your plan and how busy the network is in your area cap your speed, not only the dish. Buy a Performance kit expecting double the speed and you may be disappointed.
A second internet connection is a more dependable way to add speed. Speedify sends your internet traffic over two internet connections at the same time. Use two Starlink dishes, or a Starlink dish and a 4G/5G cellular connection, and Speedify gives you the upload and download speed of both combined, instead of relying on one dish to carry everything. If one internet connection drops, Speedify switches your traffic to the other one automatically. Speedify needs that second internet connection: with one Starlink dish alone, it can’t add speed.
Which Starlink Antenna Setup Fits Which Starlink User
The rural household. A family choosing between a Standard dish and paying extra for a Performance dish often gets more out of keeping the Standard dish and adding 4G/5G cellular with Speedify, which gives the household a second internet connection for both speed and failover.
The content creator. A creator who needs more upload speed than one Starlink dish gives can use two Starlink dishes with Speedify, so live streams and large file uploads use the upload speed of both.
The boat owner or fleet operator. A boat that runs two Starlink dishes with Speedify, instead of one Performance dish, stays online when one dish loses its signal as the boat rolls or a mast blocks its view. For fleets sharing data across several Starlink dishes, see Starlink data pooling for business.
How to Use Two Starlink Antennas at Once with Speedify
Install Speedify on your computer or phone, or on a router that runs Speedify. Connect your computer to both Starlink routers: to one over its Wi-Fi, and to the other with an Ethernet cable (some Starlink routers need the Starlink Ethernet adapter for this, and your computer may need a USB Ethernet adapter). Each Starlink dish then shows up as its own internet connection in the Speedify app. Set both to Primary. Speedify starts sending your internet traffic over both Starlink dishes right away. To keep an eye on both dishes, see how to manage two Starlink dishes at once with Speedify.
Pick the Right Starlink Antenna, Then Add Speed with Speedify
Pick the Starlink antenna that fits how you’ll use it: the Mini for travel, the Standard for a home, the Performance for boats, vehicles and places with a partly blocked sky. Then, whichever Starlink dish you start with, add a second internet connection with Speedify for what one dish can’t give you: faster downloads and uploads, and failover when one internet connection drops.
Speedify
Get started with Speedify today.
Speedify combines Wi-Fi, 4G/5G cellular, Ethernet, Starlink and satellite into one faster, more reliable internet connection. Free to try: 5 GB a month with a free account. No credit card required.
🚀 Speed
Faster uploads and downloads, because Speedify uses all your internet connections at once.
📶 Stability
If one internet connection drops, Speedify moves your traffic to the others in milliseconds.
🔒 Security
AES-256 encryption on every internet connection, on any network you join.
15M+ downloads worldwide. 75K+ five-star reviews on iOS and Android.